Products

Knife Gate Valves

Knife gate valves are designed to work in some of the harshest environments, typically having a sharpened blade to cut through heavy liquids. Knife gate valves should only be used for applications involving a completely open or completely closed position and should not regulate flow unless designed. Whenever fluid is forced against a partially closed gate, there will be a vibration, gradually eroding the disc and seat. The knife gate valves are designed to open and close to safeguard against water hammer impacts slowly.

The Knife Gate Valve provides reliable shut-off for both dry and wet line fluids. The bonnet-less valve is equipped with a heavy-duty gate to cut through both dry and wet line fluids. The bonnet-less valve sediments are ideally suited for abrasive slurries, pulp stock, semi-solids, dry ash, chips, etc.

Available in different sizes, it can be customized as per the needs and requirements of the customers. Knife edge Gate Valves for :


1. Slurry Lines

2. Sludge and Viscous Media Handling

3. Pulp and Paper Stock Lines

4. Dry Solid and Powder Handling

5. High-Temperature Gas Lines and Many More.